Softbitonline
 
 
  Home About FAQs Contact Softbitonline Jobs
Design Software Products Downloads Clients Engineering Student Photo Gallery
 
Air Conditioning Automation
 
 
 
 
 
 
 
 
 
 

Air Conditioning Automation

Air conditioning is a process to maintain a certain temperature of an area with the help of certain equipments & processes. In air conditioning we require a blower, a compressor and radiators. We can use window type units for air conditioning of small rooms. In window type air conditioning units the blower, the compressor, the radiators are placed inside a metallic cabinet and the air conditioning unit is installed in a window or in the ventilator above the door. But where area is large then air conditioning is done using air conditioning plants. The size and capacity of air conditioning plant varies depending upon the area to be air conditioned. The blower is installed in the room and the compressor unit is installed outside the room, may on the roof top or in a nearby open area. The air conditioning unit gets switched on and off automatically depending upon the room temperature. The room temperature is measured through temperature sensors. The air conditioning unit can be put in automation mode by installing a logical controller and connecting it with the temperature sensor. The air conditioning can also be operated remotely by installing wireless GSM GPRS RTU. The RTU is in installed near the air conditioning plant. Data of the air conditioning plant is sent to central control room through wireless RTU. At the central control room the monitoring and control of the air conditioning plant can be done through PC/Laptop. We can also get the data of the air conditioning plant on our mobile phone. SMS Alerts can be received on the mobile phone if there is any deviation in the performance of the air conditioning unit. Contact... info@softbitonline.com

Visit our existing range of wireless data loggers at - Products

Important: Do not remove this div tag

We can also get the data of the air conditioning plant on our mobile phone. (100314)


       
 
Softbitonline Quick Reference:
   
   
   
   
   
   
   
     

Saturday ,04 February,2017 (Four, February Two Thousand Seventeen. Indian Standard Time 10:45 Am. Day Time Zone II. RF/GSM/GPRS based data loggers and RTUs for wireless monitoring and control.Data loggers are the core component of RNRG’s complete system approach to wind and solar measurement applications. RF/GSM/GPRS based data loggers and RTUs for wireless monitoring and control.

 

This Site is Best Viewed in IE5 and above with resolution 1024 X 768
© All Rights Reserved Softbit Technologies Pvt. Ltd., India